/*
 * IRremote: IRremoteInfo - prints relevant config info & settings for IRremote over serial
 * Intended to help identify & troubleshoot the various settings of IRremote
 * For example, sometimes users are unsure of which pin is used for Tx or the RAW_BUFFER_LENGTH value
 * This example can be used to assist the user directly or with support.
 * Intended to help identify & troubleshoot the various settings of IRremote
 * Hopefully this utility will be a useful tool for support & troubleshooting for IRremote
 * Check out the blog post describing the sketch via http://www.analysir.com/blog/2015/11/28/helper-utility-for-troubleshooting-irremote/
 * Version 1.0 November 2015
 * Original Author: AnalysIR - IR software & modules for Makers & Pros, visit http://www.AnalysIR.com
 */
#include <Arduino.h>

//#define EXCLUDE_EXOTIC_PROTOCOLS // saves around 240 bytes program memory if IrSender.write is used
//#define SEND_PWM_BY_TIMER
//#define USE_NO_SEND_PWM
//#define NO_LED_FEEDBACK_CODE // saves 566 bytes program memory

#include <IRremote.hpp>

// Function declarations for non Arduino IDE's
void dumpHeader();
void dumpRAW_BUFFER_LENGTH();
void dumpTIMER();
void dumpTimerPin();
void dumpClock();
void dumpPlatform();
void dumpPulseParams();
void dumpSignalParams();
void dumpArduinoIDE();
void dumpDebugMode();
void dumpProtocols();
void dumpFooter();

void setup() {
    Serial.begin(115200);
#if defined(__AVR_ATmega32U4__) || defined(SERIAL_PORT_USBVIRTUAL) || defined(SERIAL_USB) /*stm32duino*/|| defined(USBCON) /*STM32_stm32*/|| defined(SERIALUSB_PID) || defined(ARDUINO_attiny3217)
    delay(4000); // To be able to connect Serial monitor after reset or power up and before first print out. Do not wait for an attached Serial Monitor!
#endif
    // Just to know which program is running on my Arduino
    Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));

    //Runs only once per restart of the Arduino.
    dumpHeader();
    dumpRAW_BUFFER_LENGTH();
    dumpTIMER();
    dumpTimerPin();
    dumpClock();
    dumpPlatform();
    dumpPulseParams();
    dumpSignalParams();
    dumpArduinoIDE();
    dumpDebugMode();
    dumpProtocols();
    dumpFooter();
}

void loop() {
    //nothing to do!
}

void dumpRAW_BUFFER_LENGTH() {
    Serial.print(F("RAW_BUFFER_LENGTH: "));
    Serial.println(RAW_BUFFER_LENGTH);
}

void dumpTIMER() {
    bool flag = false;
#if defined(IR_USE_TIMER1)
    Serial.print(F("Timer defined for use: "));
    Serial.println(F("Timer1"));
    flag = true;
#endif
#if defined(IR_USE_TIMER2)
    Serial.print(F("Timer defined for use: "));
    Serial.println(F("Timer2"));
    flag = true;
#endif
#if defined(IR_USE_TIMER3)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer3")); flag = true;
#endif
#if defined(IR_USE_TIMER4)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer4")); flag = true;
#endif
#if defined(IR_USE_TIMER5)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer5")); flag = true;
#endif
#if defined(IR_USE_TIMER4_HS)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer4_HS")); flag = true;
#endif
#if defined(IR_USE_TIMER_CMT)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer_CMT")); flag = true;
#endif
#if defined(IR_USE_TIMER_TPM1)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer_TPM1")); flag = true;
#endif
#if defined(IR_USE_TIMER_TINY0)
  Serial.print(F("Timer defined for use: ")); Serial.println(F("Timer_TINY0")); flag = true;
#endif

    if (!flag) {
        Serial.print(F("Timer Error: "));
        Serial.println(F("not defined"));
    }
}

void dumpTimerPin() {
    Serial.print(F("IR Send Pin: "));
#if defined(IR_SEND_PIN)
    Serial.println(IR_SEND_PIN);
#else
    Serial.println(IrSender.sendPin);
#endif
}

void dumpClock() {
#if defined(F_CPU)
    Serial.print(F("MCU Clock: "));
    Serial.println(F_CPU);
#endif
}

void dumpPlatform() {
    Serial.print(F("MCU Platform: "));

#if defined(__AVR_ATmega8__)
  Serial.println(F("Atmega8"));
#elif defined(__AVR_ATmega16__)
    Serial.println(F("ATmega16"));
#elif defined(__AVR_ATmega32__)
  Serial.println(F("ATmega32"));
#elif defined(__AVR_ATmega32U4__)
  Serial.println(F("Arduino Leonardo / Yun / Teensy 1.0 / ATmega32U4"));
#elif defined(__AVR_ATmega48__) || defined(__AVR_ATmega48P__)
  Serial.println(F("ATmega48"));
#elif defined(__AVR_ATmega64__)
  Serial.println(F("ATmega64"));
#elif defined(__AVR_ATmega88__) || defined(__AVR_ATmega88P__)
  Serial.println(F("ATmega88"));
#elif defined(__AVR_ATmega162__)
  Serial.println(F("ATmega162"));
#elif defined(__AVR_ATmega164A__) || defined(__AVR_ATmega164P__)
  Serial.println(F("ATmega164"));
#elif defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) || defined(__AVR_ATmega324PA__)
  Serial.println(F("ATmega324"));

#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__)
  Serial.println(F("ATmega644"));
#elif defined(__AVR_ATmega1280__)
  Serial.println(F("Arduino Mega1280"));
#elif defined(__AVR_ATmega1281__)
  Serial.println(F("ATmega1281"));
#elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
  Serial.println(F("ATmega1284"));
#elif defined(__AVR_ATmega2560__)
  Serial.println(F("Arduino Mega2560"));
#elif defined(__AVR_ATmega2561__)
  Serial.println(F("ATmega2561"));

#elif defined(__AVR_ATmega8515__)
  Serial.println(F("ATmega8515"));
#elif defined(__AVR_ATmega8535__)
  Serial.println(F("ATmega8535"));

#elif defined(__AVR_AT90USB162__)
  Serial.println(F("Teensy 1.0 / AT90USB162"));
  // Teensy 2.0
#elif defined(__MK20DX128__) || defined(__MK20DX256__)
  Serial.println(F("Teensy 3.0 / Teensy 3.1 / MK20DX128 / MK20DX256"));
#elif defined(__MKL26Z64__)
  Serial.println(F("Teensy-LC / MKL26Z64"));
#elif defined(__AVR_AT90USB646__)
  Serial.println(F("Teensy++ 1.0 / AT90USB646"));
#elif defined(__AVR_AT90USB1286__)
  Serial.println(F("Teensy++ 2.0 / AT90USB1286"));

#elif defined(__AVR_ATtiny84__)
  Serial.println(F("ATtiny84"));
#elif defined(__AVR_ATtiny85__)
  Serial.println(F("ATtiny85"));
#else
    Serial.println(F("ATmega328(P) / (Duemilanove, Diecimila, LilyPad, Mini, Micro, Fio, Nano, etc)"));
#endif
}

void dumpPulseParams() {
    Serial.print(F("Mark Excess: "));
    Serial.print(MARK_EXCESS_MICROS);
    ;
    Serial.println(F(" uSecs"));
    Serial.print(F("Microseconds per tick: "));
    Serial.print(MICROS_PER_TICK);
    ;
    Serial.println(F(" uSecs"));
    Serial.print(F("Measurement tolerance: "));
    Serial.print(TOLERANCE_FOR_DECODERS_MARK_OR_SPACE_MATCHING);
    Serial.println(F("%"));
}

void dumpSignalParams() {
    Serial.print(F("Minimum Gap between IR Signals: "));
    Serial.print(RECORD_GAP_MICROS);
    Serial.println(F(" uSecs"));
}

void dumpDebugMode() {
    Serial.print(F("Debug Mode: "));
#if DEBUG
  Serial.println(F("ON"));
#else
    Serial.println(F("OFF (Normal)"));
#endif

}

void dumpArduinoIDE() {
    Serial.print(F("Arduino IDE version: "));
    Serial.print(ARDUINO / 10000);
    Serial.write('.');
    Serial.print((ARDUINO % 10000) / 100);
    Serial.write('.');
    Serial.println(ARDUINO % 100);
}

void dumpProtocols() {

    Serial.println();
    Serial.print(F("IR PROTOCOLS  "));
    Serial.print(F("SEND     "));
    Serial.println(F("DECODE"));
    Serial.print(F("============= "));
    Serial.print(F("======== "));
    Serial.println(F("========"));
    Serial.print(F("RC5:          "));
#if defined(DECODE_RC5)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("RC6:          "));
#if defined(DECODE_RC6)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("NEC:          "));
#if defined(DECODE_NEC)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("SONY:         "));
#if defined(DECODE_SONY)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("PANASONIC:    "));
#if defined(DECODE_PANASONIC)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("JVC:          "));
#if defined(DECODE_JVC)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("SAMSUNG:      "));
#if defined(DECODE_SAMSUNG)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("LG:           "));
#if defined(DECODE_LG)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("DENON:        "));
#if defined(DECODE_DENON)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

#if !defined(EXCLUDE_EXOTIC_PROTOCOLS) // saves around 2000 bytes program memory

    Serial.print(F("BANG_OLUFSEN: "));
#if defined(DECODE_BEO)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("BOSEWAVE:     "));
#if defined(DECODE_BOSEWAVE)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("WHYNTER:      "));
#if defined(DECODE_WHYNTER)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif

    Serial.print(F("FAST:         "));
#if defined(DECODE_FAST)
    Serial.println(F("Enabled"));
#else
    Serial.println(F("Disabled"));
#endif
#endif
}

void printDecodeEnabled(int flag) {
    if (flag) {
        Serial.println(F("Enabled"));
    } else {
        Serial.println(F("Disabled"));
    }
}

void dumpHeader() {
    Serial.println(F("IRremoteInfo - by AnalysIR (http://www.AnalysIR.com/)"));
    Serial.println(
            F(
                    "- A helper sketch to assist in troubleshooting issues with the library by reviewing the settings within the IRremote library"));
    Serial.println(
            F(
                    "- Prints out the important settings within the library, which can be configured to suit the many supported platforms"));
    Serial.println(F("- When seeking on-line support, please post or upload the output of this sketch, where appropriate"));
    Serial.println();
    Serial.println(F("IRremote Library Settings"));
    Serial.println(F("========================="));
}

void dumpFooter() {
    Serial.println();
    Serial.println(F("Notes: "));
    Serial.println(F("- Most of the settings above can be configured in the following files included as part of the library"));
    Serial.println(F("- IRremoteInt.h"));
    Serial.println(F("- IRremote.h"));
    Serial.println(
            F("- You can save SRAM by disabling the Decode or Send features for any protocol (Near the top of IRremoteInt.h)"));
    Serial.println(
            F(
                    "- Some Timer conflicts, with other libraries, can be easily resolved by configuring a different Timer for your platform"));
}